Extractors to suit B200e. good condition. Raps around pulse air system and also has egr pipe fitting. rolor roof racks in good condition. dash mat. average condition. black. $ 100 Aust. dollars the lot. pick up only phone 0409862816

Hi there. Come and see us. We have dismantled more 360's than anyone in Australia.
The companies name is Berry Motor Group. We are out in Mitcham
ph. (03)98745544
Smithy.

Here is a photo of the turbo engine pipe. It wrapped around the steering columm and then went into the centre under the torque tube with flanged fittings. it is ceramic coated.

Hi there. If you go ahead with the turbo conversion i have a turbo engine pipe to suit a 360. It wraps around the steering shaft nicely and is ceramic coated. I will see if i hve a picture somewhere.
smithy

I will be at 16 thornton crescent in mitcham tomorrow, at my work. We repair, sell and wreck volvo's and BMW. Lots for you to have a look at if you are to make it out that far.
Smithy.

Are you still in Melbourne now. I live in the eastern suburbs. what area are you staying in?

This is the last you will see of my 360. in five years I have had three engines (b200, b23e, b230ft) Two diffs , many tyres and three different injection systems. I have done almost a hundred thousand kms. I decided i would move on to a 244. I always worried about the weak driveline in the 360. Ihav...

With the standard manifold i have about an inch of clearance and the turbo sit just over the rail. no intercooler. I was going to fit a skyline intercooler on the lh side near the battery but never got around to it. The red bit near the turbo is the top part of the engine mount bracket. It's a bit r...

I forgot the photos.

I have put in a 740 turbo engine. I changed the sump, oil pump I wired in the complete 740 ignition system and injection system (in Aust . we got the LH 2.2).I put in a lightend 240 flat flywheel. I made my own engine pipe and had it ceramic coated to keep the heat off the master cylinder. At the mo...

The engine is in. The engine pipe that i made has been ceramic coated so hopefully it won't cook the master cylinder. I am not running an intercooler yet (very soon.) I put a 240 flat lightened flywheel in with a clutch from an Astra 2ltr. engine. It is slightly thicker so it put the diaphragm past ...

Thank a lot for that. Iam going to take the chance. The engine swap is going to start this weekend. I made up a right hand engine mount bracket using a rh 240 rubber mount. I am going to fit a standard skyline intercooler. It looks small compared to the 740 intercoolers. but there isn't much room so...

I sent the stock cams to the regrinder and he checked the profiles. They are very mild and will work against the turbo when on full boost. Cat Cams advertise turbo cams that will run with standard lifters, so it would nice to be able to get a price before we spend too much money on rebuilding the st...

Help: I am trying to find some turbo camshafts for a b230ft with a 16v head. I have been sending messages to catcams in US. and Canada but i haven't even received any replies at all. In Australia the only things i can get are built up and reground to something the cam grinder thinks that would be o....

I am fitting a 740 turbo engine my 360. I have hit a small snag the oil pump gears on the turbo engine are longer to give a greater flow. If i put the 360 top on the pump the sunp won't fit. If anyone has come across this and can help it would be greatly appreciated. thanks