Thank you very much for the quick and usefull answer.

The second type of mount, as i've seen in other topics , seems to bee the older type, used on 345 with b19.

I have a question about the engine mountings. My car has one type of engine mount on the right side(the oil filled one) and another type on the other side(this is a rubber one).Is this normal, or 360's should have oil filled mounts on both sides? As i have not seen the answer to this question, i ask...

I've checked dhl and it's way to expensive-about 100 euros. With your mail, which i see it's called "Royal Mail", it's only about 15 or so http://www.royalmail.com/portal/rm/content1?catId=400037&mediaId=400393 ; that's only up to 2 kg, i have no ideea if the renix and air mass meter is below that. ...

Do you also deliver by mail? If so i really want the amm and renix, expecialy the renix..

I have done this once on the back window of my last car so i know about the string, the presure, etc. What i din's know is how to take the windshield out without cuting the rubber(i did that last time 'cose i had a new rubber) and if the dashboard had to come off for the refiting. Thanks for the adv...

My windshield is cracked so i'll have to change it. I'll be doing this myself , probably with help from some friends so i have a few questions for anybody who did this. Does the has to come off? if so are there any tricks or very hidden bolts that i would find very hard? How do you take of the winds...

The only way fuel gets into the oil is at the fuel pump, this is aplicable at any mechanical fuel pump for carbs. The pump should be in the left side of the engine(mine has a patch of steel there) and it's very accesable. take it of and see what you can change on it (probably the rubber gasket insid...

Your theory isn't that bad, the one about bad mixture in cold weather, but that's the reason why on the air filter box you have an automatic switch between air from autside the car (normal ambient temperature air) and air from near the exhaust maniford(hot air when the air is up to temperature).Givi...

There's a lot of them but for some reason they're hiding!

As said before, if the carb adjustment dosen't work , then it must be the ignition. The Black substance on the spark plugs is the result of unburned fuel.Unburned fuel happens in two cases(usualy it's a combinations of the 2 factors): either the fuel mixture is to rich , or the spark is to weak to e...

360 gl - 410000 km.

I have 0.4 on every cylinder, except 2 of them on wich i have 0.35.Do You think if that i would adjust the clearence to 0.35 to all the cilinders there would be a diference?

I know what happens if the belt snaps.I changed the belt tensioner,it's new and mounteed on the car today. The question is: the belt that is almost new (8 months and 5000 km) , could it have been so affected by the heat that it wouldn't last a couple of weeks until i'll change it? (sorry if i haven'...

It was a stupid thing , i know.The reason was lack of money and that the bearing didn't have any obvious play, only a sound of being worn and i didn't know that is so important (the car i had before was on chain). Anyway what was done was done , did you have a similar problem of heard of such?

I checked and changed the distribution belt tensioner today and what i found is on the pictures attached.The bearing war worn and heated to much, it melted the belt a little. Has anyone had this problem?what are the consequinces for the belt? i will change it as soon as i have the money (a few weeks...