Really should start work on this

Post by **garethreece** » 22 Oct 2007 12:14 pm

After many years of hibernation, and despite needing funds for other things. I really need to start gettin to work on my rusty ol' 3dr 360.

Just a quick Question or 2 (first of many I expect)

1) How hard is it to repalce the front crossmember (dad took an angle grinder to it to get the bonnet catch off

)

2) What are the main things that will be hard to get hold of? How many bits can I nab off 3dr 340s and 5dr 360s?

Post by **classicswede** » 22 Oct 2007 12:45 pm

1) which part do you mean by the crossmember?

2) most parts are obtainable so no real issues to worry about

Post by **garethreece** » 22 Oct 2007 01:00 pm

The very front of the car, with the VIN plate on, the one the bonnet catch is attatched to, dad butcherd it cos the 340 needed a bonnet catch and dad was to impatiant to wait for WD40 to do its stuff

Post by **classicswede** » 22 Oct 2007 01:05 pm

Best bet is to cut and weld in a replacment