problem

Various, various and more various!
Post Reply
djigor
Posts: 17
Joined: 13 Mar 2006 12:04 pm
Location: Serbia, Belgrade

problem

Post by djigor » 21 Feb 2007 09:43 pm

Did anyone have (had) this problem?

Image

Image

and what did you do :?: :roll:

User avatar
petefarrell360
*** V3M DONOR ***
Posts: 3083
Joined: 11 Oct 2004 07:12 pm
Location: Bucks, UK

Post by petefarrell360 » 22 Feb 2007 02:14 am

There are many things that can happen to the window weather seal strips. With age they normally go brittle and the edges snap off and disintegrate, or the strips tear off or break apart and lift off like yours. I need to replace them on one of my cars. Aparently Volvo only have the strips for the 3 door Volvo 300's in stock. This isn't a major problem, as they are longer, so you just need to cut them down to fit. It's worth doing to try and keep as much water out of the doors as possible to prevent corrosion.

Pete
G reg 360 GLT, G reg 340 GL Variomatic, plus many more..........

redline
*** V3M DONOR ***
Posts: 5432
Joined: 05 Oct 2004 10:18 am
Location: MILTON KEYNES , ENGLAND

Post by redline » 22 Feb 2007 08:16 am

I have never seen a volvo with patterned frosted glass before


Image

lol

as pete said replacement is the only answer to stop the rot before it starts
Image

djigor
Posts: 17
Joined: 13 Mar 2006 12:04 pm
Location: Serbia, Belgrade

Post by djigor » 22 Feb 2007 10:53 am

:lol: :lol:

djigor
Posts: 17
Joined: 13 Mar 2006 12:04 pm
Location: Serbia, Belgrade

Post by djigor » 22 Feb 2007 10:55 am

A lot of hard work. :wink:

classicswede
*** V3M DONOR ***
Posts: 5465
Joined: 25 Apr 2005 06:52 pm
Location: Anglesey North Wales
Contact:

Post by classicswede » 22 Feb 2007 01:46 pm

The seals are fairly easy to fit. Only the 2 door version is availabel so you need to cut them down. Make sure you but two sets.

The job is very easy if you take the glass out as you need to hook the seal into the clips. It can be done with the glass in place as I have done it that way. It is best to use some sealant to lock the strip in.
Dai

Please email me directly on dai@classicswede.co.uk

http://www.classicswede.com

phone/text 07824887160

Web shop http://www.classicswede.co.uk/

Image

djigor
Posts: 17
Joined: 13 Mar 2006 12:04 pm
Location: Serbia, Belgrade

Post by djigor » 22 Feb 2007 03:43 pm

I know how to fit them, but there is no way for me to find those things in Serbia. Is it posible that anyone of you buy it for me. Please, tell me the price and I would send you money in advanced.

User avatar
trabitom99
*** V3M DONOR ***
Posts: 4398
Joined: 06 Jan 2007 02:38 pm
Location: Bonn, Germany

Post by trabitom99 » 22 Feb 2007 05:56 pm

The problem is, once you take the price of the part, insured postage and bank charges into account you could probably buy an entire car for that money.

Do you know anyone in a country with a Volvo main dealer who could help you out? Or perhaps another Serbian V3M forum member?

Tom
343 GL Touring B14.1E CVT (155) 98000kms 1980 (sold)
343 L Junior B14.3E MT4 (155) 229000kms 1981 (scrapped)
343 DLS B19A MT4 (155) 167900kms 1982
360 GL Injection B200F MT5 (231) 348598kms 1988 (scrapped)
360 GLT B200F MT5 (302) 230000kms 1988

User avatar
IvanS.
Posts: 190
Joined: 18 Jan 2007 06:51 pm
Location: Serbia, Belgrade
Contact:

Post by IvanS. » 22 Feb 2007 07:10 pm

There is some dealer of Volvo parts i think on Banovo Brdo, my dad bought renix there. Prices could be spicy, i'll ask my dad for the current location, and i have some info about volvo parts here. Here goes :

Volvo parts :

Viking - Bul. kralja Aleksandra 472 ( tel 011-420-475; 063-212-518; 063-8271-010 )

Auto-kuca Luka ( ovlasceni autoservis, prodaja )
Zemun - Vojni put 165A ( tel - 3149-358 )

Volvo servis Mika
Vinca - Smederevski put 29 ( tel 011-806-51-61 ; 063-229-938 )

Auto otpad Alex -- prodaja otkup delovi ( tel - 011-758-377 )

Toliko imam Nadam se da ce ti ovo pomoci.
BTW : nisam siguran da li su menjani telefoni i lokacije. Upisao sam sve nove brojeve koji nisu precrtani.

Sorry for the others i didn't have time for translation :D
Volvo 340 GL 1.4 (1986)

djigor
Posts: 17
Joined: 13 Mar 2006 12:04 pm
Location: Serbia, Belgrade

Post by djigor » 22 Feb 2007 07:13 pm

You`r probably right. I`ll try at local dealer. Thanks.

djigor
Posts: 17
Joined: 13 Mar 2006 12:04 pm
Location: Serbia, Belgrade

Post by djigor » 22 Feb 2007 07:23 pm

Thanks Ivan, I know all that. I think that only Luka can help me.

User avatar
IvanS.
Posts: 190
Joined: 18 Jan 2007 06:51 pm
Location: Serbia, Belgrade
Contact:

Post by IvanS. » 22 Feb 2007 07:27 pm

Good luck. I'll seek for some more info.
Volvo 340 GL 1.4 (1986)

User avatar
srtames
Posts: 91
Joined: 21 Jan 2005 03:37 pm
Location: Reading,england

Post by srtames » 23 Feb 2007 02:38 pm

Mine are the same.I squirted black mastic gutter sealant (non hard stting type)into the channel in the plastic seal to reinforce them and divert the water outwards.
340 also leak into the car if you park on a sideways slope and the bonnet leaks over the fusebox!
Hope it rains less than England

reegards, Steve
1989 340DL,1397
1979 CapriGL ,1593

Post Reply