Hello ,
I need to find a new or used part on which the rear wheel is mounted. Don't know how it's called. It should look something like this
http://s214.photobucket.com/user/turbea ... 7.jpg.html
It's from a 360. Haven't removed it yet. Maybe someone knows the part's number? If I can't find a new one maybe I can find a used one ? What other volvos used the same part?

Half-shaft?

Wheel Hub?

Wheel axle?

No. 9


360rearaxle by macplaxton, on Flickr

360 up to chassis number 120999 part number 3280432
340 / 360 from chassis number 121000 (MY1986) Part number: 3245853

If you need wheel flange, hub or or the bearing, you will need a new bearing. Taking out the wheel flange will destroy the bearing.

Its a bit tricky but do-able.

viewtopic.php?f=54&t=10548

I still don't get how to take the wheel hub of. This is how it looks without the drum.

As you can see it needs new studs. Do I need to remove the axle somehow to get the hub off?

Kristupas wrote:I still don't get how to take the wheel hub of. This is how it looks without the drum.

As you can see it needs new studs. Do I need to remove the axle somehow to get the hub off?

Disconnect the outer driveshaft CV joint first. Then undo big nut on inside.

See: viewtopic.php?f=36&t=7264 "Steering PDF" page 45 for more details.

Then you need a good puller. Also as above you will need a new bearing.

And what is that twin turbo 6 pot going into?