hey
ive spent hours searching on this forum but cant find a answer to my problem
so here goes i know that rear mr2 springs from the later models the more smoother one fit the front with a bit off chopige
but i can get some mr2 springs off an earlier car the boxer one does any one know if they would still work
as ive got some lowering blocks coming so want to get summet for the front
also what year does the peugeot 205 sterring boss fit
thanks a bunch guys and gals

AFAIK the 205 boss will fit any 300. it certainly fit's mk2/3. Approx. '83-91?

As for the springs, have a search on IMOC and see if anyone has fitted mk1 springs to a mk2 MR2?

OapEM wrote:AFAIK the 205 boss will fit any 300. it certainly fit's mk2/3. Approx. '83-91?

As for the springs, have a search on IMOC and see if anyone has fitted mk1 springs to a mk2 MR2?

i just wanted to make sure about he boss before i bought 1

and for the springs never thought off that nice one thanks mat

I broke an MK2 MR2 earlyer this year but the only parts Ive got left are the seats which are in the 340. I dont know the MK1 MR2 as well but It is a completely different car. The MK2 has a 2l engine and is a good bit bigger and heaver, where that MK1 had a lighter 1.6. If the springs are cheap then Its worth the risk but I wouldn't expect them to fit.

nar dont think i bother waisting my money to be honest
ill pop over to auto spares there only 25 quid a spring
thanks mat

Not much saving over buying teh real thing for a 300 from me then.

real thing i didnt think they made them
and info on that

I thought you had to be looking at about 20 all in, otherwise I would have mentioned the Custom springs avaliable from Dai. Well worth it.