disconnect and remove the fuel rail -Help

B14, B172, B19/200, D16 engine, ignition, cooling, fuel & exhaust system, gearbox, variomatic, final drive... | Tuning: engine swaps, welded diff, clutch upgrades...
NO parts requests here, please use our V3M BUY & SELL corner
Post Reply
kelvingenders
Posts: 463
Joined: 12 Apr 2010 08:40 am

disconnect and remove the fuel rail -Help

Post by kelvingenders » 07 Feb 2011 01:09 pm

Does anyone have pictures of where I can disconnect the fuel rail from on a 360 GLT B200E. I had a look today and was unsure.I'm looking at replacing the injectors and O rings but don't want to snap/break any parts which will not be replaceable.

Kelvin - Brisbane :360:
Top
User avatar
L14MNP
Posts: 1340
Joined: 26 May 2010 09:15 pm
Location: Sunderland/Durham

Re: disconnect and remove the fuel rail -Help

Post by L14MNP » 07 Feb 2011 01:34 pm

Remove the fuel pipes going to the rail/FPR, unbolt the rail and FPR, unclip the injectors harness and unbolt the grounds to them then just pull the entire rail/injector set up out of the inlet.
STREETO WITHDRAWL
INTO BURNOUTSsince1982
Top
CBA
Posts: 1071
Joined: 24 Mar 2010 02:14 am

Re: disconnect and remove the fuel rail -Help

Post by CBA » 14 Feb 2011 09:22 am

...
with a cold engine.
also padding round the injectors with kitchen roll will help soak up the 2oz of fuel that will spill from the rail.
Top
Post Reply

Return to “Engine, transmission, manual gearbox, variomatic”