340 blueline (1989) breaking

[jcred22]

Ok I have decided to break up my blueline (1989 model). It just requires too much welding for me and Iv lost interest. I needs a small patch on the drivers side floor and patches on the sills, I started to bodge some of the repairs with fibreglass and on one of the sills near the rear arch I have welded a plate in (too bad to bodge with fibreglass.

All the interior is gone exept for the front (heated seats)

It ran fine last time I checked but the idle speed sometimes speeds up and the battery is leaking.

It has land rover rear shocks, 3 inch lowering blocks and -3 inch front springs, blueline alloys, blueline spoiler

If anyone needs any parts/panels please call 07737754196

Im not looking to make a killing on this car, just wanna cut my losses and help out some fellow 340 owners rather than send it to the scrapyard. I will take £300 for the whole car (no offers Im afraid, I think this price is reasonable) but u will need a trailer etc because it has no mot/tax

car is in Hayes, Middlesex ub4 (near heathrow airport)

[jcred22]

parts sold/provisionally sold include, bellhousing, flywheel, alternator tensioner bracket, front heated seats, passenger side rear light unit, clocks, water hoses/water pipe/t piece, drivers side front door,

loads still available including a good bonnet (painted with blackboard paint), tailgate (dented), radiator, fan, front lights, indicators, drivers side rear light unit, horn, brake servo, carb with manifold, inlet manifold, throttle mechanism, most of the engine is still there if any1 needs pulleys, front cover etc etc, MAKE ME AN OFFER ON ANY OF THE ABOVE OR ANYTHING ELSE U NEED.

Also I have some suspension lowering parts which have been on the car for NO MORE THAN 10 MILES!!!
-3 inch lowering blocks from classicswede.com £25+p&p (2 nuts/bolts are missing but u can easily get these from b and q) (these will come with a set of FREE landrover shocks which have also done 10 miles but one of them is a bit dented due to me driving with no anti tramp bar fitted.)
-3 inch front lowering springs from classicswede.com £40+p&p (these are double the poundage of the standard springs)

The shell will be going to the scrapyard next week, I will be stripping pretty much EVERYTHING off it. If any1 wants the shell I will let it go for £50 (with logbook) because that is what I think the scrap man would happily come round and give me for it. If I had a truck myself I would weight it in myself and probably get more. The engine will be going with the shell (in the boot) but I will take what I can off it in case someone needs anything later on (rocker cover, cylinder head, pulleys etc etc)

Thanx. Justin

[Marlow]

Howdy.

I would be interested in the suspension bits. Also, if the clocks have rpm meter and don't get sold, I'd be interested in them, too.

/M