RX7 big brake upgrade, its not complete so will need some work. Reconditioned RX7 calipers, brand new golf g60 brake discs already drilled for a volvo hub, brand new set of brake pads, brand new brake hoses. My understanding is, to fit this you will require just a pair of brackets to bolt these calipers to the standard legs. Adam (340GLT) has already done this conversion so im sure if you asked nicely you'd be able to acquire a pair from him
Bare in mind these wont go under 13's, not sure of 14's but definitely 15's - £200
Coilover conversion kit, once again not complete. Includes good condition front legs with spring pans removed, brand new gabriel 'gas rider' front inserts, brand new threaded collars with spring seats, brand new spring top cups and a pair of good condition top mounts. The collars needed to be welded on, and a pair of springs need to be acquired in 2.5inch. This will give you height adjustable front suspension. I can also supply you with a pair of extended suspension turrets (at extra cost) that will allow you to go 2inches lower without running out of damper travel, but will keep the same amount of damper travel so no dampers bottoming out
The turrets are for s13 top mounts so you'l need to fit a pair of s13 top mounts to use them - £150 (+20 for 2inch turrets)
Now the boring stuff... Open to offers on all of this.
Nicely reconditioned mirrors, painted satin black properly (keyed, 2 coats, glass polished and re fitted) v.good condition, include fixing screws and internal panels - £20
Mk3 tank sender - £5 - I also have a mk1 sender, but works in mk2's. Currently in the tank, but £10
Mk3, 1.7 anti-roll bar- £10
Need all this gone please, time to make room for lada parts haha
Thanks, Thomas.............
