Page 1 of 3
B230FT 2.3 turbo engine
Posted: 27 May 2011 06:19 pm
by 940turbo
I'm breaking a Volvo 940 Turbo model, I believe you guys put the engines in 300s so thought it was worth a post here.
B230FT engine, was running the stock 8psi. Slight tapping from top end, think the valve clearances need doing. Recent new clutch but this was potentially damaged during recent gearbox trouble (implosion). 180k-ish
Can be seen running for a short period. If there is interest I will take a deposit and remove it ready for collection.
Can come with manifolds, turbo, water pipes and any specified wiring if required.
Engine/car is based in Nottingham, East Mids
£100
Re: B230FT 2.3 turbo engine
Posted: 27 May 2011 07:39 pm
by L14MNP
Not even a slight mention for me even after I vouched for you. :@
Re: B230FT 2.3 turbo engine
Posted: 27 May 2011 07:51 pm
by volvosneverdie
L14MNP wrote:Not even a slight mention for me even after I vouched for you. :@
Feel canny uncomfortable now like...........
Not sure whos lide to take.
Re: B230FT 2.3 turbo engine
Posted: 27 May 2011 08:32 pm
by 940turbo
Be quiet you're ruining my for sellings thread.
By the way the rest of the 940 is available if anything else is required.
Re: B230FT 2.3 turbo engine
Posted: 27 May 2011 08:49 pm
by Evoman
100? if only i had somewhere to put it :/
Re: B230FT 2.3 turbo engine
Posted: 27 May 2011 08:57 pm
by volvodspec
under your bonnet!
Re: B230FT 2.3 turbo engine
Posted: 27 May 2011 09:07 pm
by volvosneverdie
volvodspec wrote:under your bonnet!
Do this.
I repeat.
Do this.
Re: B230FT 2.3 turbo engine
Posted: 27 May 2011 09:48 pm
by Speedy88
I passed this on to someone who might be interested.
Re: B230FT 2.3 turbo engine
Posted: 27 May 2011 10:48 pm
by Evoman
volvosneverdie wrote:volvodspec wrote:under your bonnet!
Do this.
I repeat.
Do this.
Id love to, but its a long term plan. I have no engine crane or workshop but im sure i could pull some strings
Can you just use the mainfold and turbo from these on a b200e?
Re: B230FT 2.3 turbo engine
Posted: 28 May 2011 08:41 pm
by 940turbo
Buy it and find out!
Be a shame to weigh a working engine in but that's the way it's going
Re: B230FT 2.3 turbo engine
Posted: 28 May 2011 09:26 pm
by 13431
how much do you want i need everything from the front end basicly
Re: B230FT 2.3 turbo engine
Posted: 28 May 2011 09:59 pm
by 940turbo
Literally everything? Suspension? Braking system? Wiring loom? Lights and bodywork?
Re: B230FT 2.3 turbo engine
Posted: 28 May 2011 10:14 pm
by volvosneverdie
940turbo wrote:Literally everything? Suspension? Braking system? Wiring loom? Lights and bodywork?
Guessing Lump and ancilliaries.
Maybe box.
Re: B230FT 2.3 turbo engine
Posted: 28 May 2011 10:19 pm
by 940turbo
Lump with manifolds/turbo, connected air/water pipework, coil, leads, belts, alternator £100
Gearbox is knackered so not for sale unless you want a knackered gearbox! (see note in 1st post about box/clutch)
Can include ECU for extra £20
Re: B230FT 2.3 turbo engine
Posted: 28 May 2011 10:42 pm
by Evoman
940turbo wrote:Buy it and find out!
Be a shame to weigh a working engine in but that's the way it's going
Fair logic! I think i get a bit carried away, I need to wait till I have more tools and a better set-up. I get all carried away about making coilovers then very quickly realised i couldnt afford to do what i wanted
