Its with a heavy heart i do this but due to having no where to work on it anymore my wife's Volvo 360 Drifter is up for sale.

First i will state that this is a DRIFT CAR and a PROJECT with NO MOT OR TAX!!!

Was featured in a Redline Magazine feature early 2010 before i owned it

Its a 2.0lt GLT model

Engine is standard apart from an air filter (which has seen better days)

Has a drivers bucket seat and harness

Dished steering wheel

Fly off hand brake modification

Stripped interior

Lowered with front lowering springs and 2 inch lowering blocks

Front shocks filled with thicker gear box oil and rear Land rover shocks (very stiff suspension, but no so much that the ride is shit)

Welded diff

Custom made wide arches (modified from 205 GTi ones)

Various stickers on boot and side quarter windows

Will come with a spare pair of volvo steels with very good tyres and 2 drifty rims no tyres (think came off a colt)

Pictures dont do this justice, realy nice car and with the space to work on it could be brought back to its once awsome glory. Sits very low to the ground, rides nice and stiff, very little body roll. This car was built with one thing in mind, Drifting and thats what it does very well.



Car will not come with the Custom Wide Wella Steel 13's as im selling these separately. However if you wish for both we can sort a deal. Believe these are 8j if memory serves. with a nice dish. All have a touch of kurb rash and one has a slight dent in lip. All have good tyres, stretched nankangs. 195/55/13 i believe



Recently took this to get an MOT to see what was needed to get her on the road and it failed on sills, no working horn, Suspension top mounts had play, the lowering blocks made of wood (Like this when i bought it, didn't even realise until up on ramps) and a bulb blew on way to test center. and the exhaust leaking like a sieve.

I have since welded up the 2 front sill points (not the neatest in the world but good and strong, bit of filler to smooth over and some paint, good as new)

Had some metal lowering blocks fabricated but not fitted (will come with car)

A horn is present and all wired in, just needs a button on the dash to connect to.

An exhaust needs fabricating, i have various bits of exhaust and pipes that will come with the car. Some stainless some normal.

And the rear sill sections still need welding

So, make/buy and exhaust, fit rear lowering blocks provided, weld up rear sill sections and buy and fit some top mounts and you should be all set for MOT should you wish.

The only reason i haven't finished it off myself is i physically have no where to do the work, i cant do it at mine as its shared parking on gravel. And unfortunately whilst i was doing it at my parents in the drive the neighbors started kicking up a stink and threatening to call the police and council extra as i was disturbing them with the grinding and welding. So its got to go or it will just sit there.

Tried to be as honest as i can, realy nice drifter in need of some TLC. Its realy fun little car and pulls pretty well, ive got an s14a and i must admit when this was last on the road i found myself nicking this quite a bit as its such a joy to drive and skid.

Looking at £350 o.v.n.o for the car, will come with a set of honda civic wheels with good road legal rubber.

Or £700 with the steels

How much for the wheels I want them now!!

Got interest in the car as it sits but make me a good offer on the rims and I can whip them off

NOOOO!!! I want those wheels too! RARGH! No money!

Evening BUMP!!!! Had lots of interest in this from other forums/adverts, got people coming to view. Any Interest from you lot????

i fancy the wheels aswell!!!!! how much !!!!!

As stated got people wanting the car as a whole so at the minute 700 with a free volvo however if they dont take it will put up a price for rims

hi mate

how much for the car as it sit's??

cheers
Adam.

OK car is now SOLD!!!! However wheels are still here, These ARNT!!! banded steels, they are WELLA steels that have one piece wide rims, not a band. They come with nankang tires with good tread (will dig out a tread guage to get exact amount when i get a chance)

Looked at these in more detail when i took them off, they are fine bar a little kurb rash on a couple and a small dent to the lip in one (Only cosmetic could be bent back when tires taken off to change)

These arnt cheap rims and the tyres arnt cheap so will not be letting these go for peanuts so sensible offers only please.

Which you can buy for 280 new, so depending on the tyres I'll give you 200

Best you go buy them new the, you keep saying you can get them that cheap but wont tell me where. Id like to know where as I couldnt even get wheels banded for that price

Go on the weller website, I'll send a link when I'm home, on my phone at the sec

Fair enough couldnt ever find them that cheap, the last set I saw similar to mine sold for 300 with fucked tires, and didnt see them on wellas site. I cant let them go for 200 as tyres stand me that alone and theres loads of tread left, will just keep them for a future project if I cant get more

BOOM!!! Its the dub scene that's made them "rare". They still exist.

http://www.polleysport.com/polley/catal ... l%20Wheels

Yup.
50 bones a corner bare if you want to wait 3 or 4 weeks for delivery......
Saying that, ive sold them for more before.

With all the love in the world:
This is a for sale thread.
If you dont like it, dont buy it.