feeler uprated rear springs

Post by **classicswede** » 12 Oct 2008 08:59 pm

Just a feeler as to what interest there is in some uprated rear springs. Can be made to any spec.

Post by **filthyjohn** » 12 Oct 2008 09:47 pm

2 pairs wanted but unsure as to stiffness required, which is why I haven't yet approached my local spring makers.

Post by **hodgy21** » 14 Oct 2008 07:48 am

Definately interested in this.

Post by **kaos** » 14 Oct 2008 06:05 pm

would be intrested as well, but wouldnt have a clue in what i was after etc thasts where you'd loose me

Post by **pyro** » 14 Oct 2008 07:21 pm

yep id maybe be interested in a set, cant say for definate! student loans n all that cr*p!

cheers - ben

Post by **classicswede** » 15 Oct 2008 08:40 am

If we can get about ten names down as very interested I'm sure I can make it happen.
Kaos - don't worry about what speck you will need I can work that out. The only thing is I will probably have to get them all made std ride height so you will still have to use lowering blocks.

If there is a lot of interest in lowered as well as std hieght springs we could try and do both

Post by **pistonpen paultje** » 15 Oct 2008 09:43 am

Name a price...!

Post by **Chris_C** » 15 Oct 2008 09:44 am

Were GLT lower? I know all GLT's seem to ride higher now as they were stiffer, but wonder if they used to actually be lower

. I'm very provisional on this, I want them but as normal it depends on the price we are looking at I'm afraid.

Post by **SteveP** » 15 Oct 2008 09:55 am

Definitely lower... my 343 was waaayyy higher than my 360 and your 340 always looked higher than my 360 too