whats the gear knob thread size?

[frazeb]

on a 340 i need a new 1 but i dont no what thread size i need. if any1 can help itd b much apreciated

[volvosneverdie]

No thread. Just pull. Hard.

17mm ish if I remember right.

[MCHUDD]

Hi mate.
As VND says, just pull your knob off
If your stuck, i have one kicking about somewhere.
Cheers Mark.

[macplaxton]

No thread. Just pull. Hard.

I remember some 16/17 years ago now driving a friend's mother's V 340 (I think it was a 1.7), down to Galashiels from Edinburgh. I don't remember the car being all that old at the time, but the gear knob had a habit of just coming away in your hand (say on a shift down from 3rd to 2nd). Also it had the old tailgate lock problem where the barrel came out with the key.

Was it splined or something?

[frazeb]

yh i see what u mean. im looking for a slightly taller gear stick but ebays proving difficult

[charlieog1243]

im looking at putting a jap crystal gearknob on mine but im not sure if it would work with the reverse lifter bit anyone no?

[volvosneverdie]

im looking at putting a jap crystal gearknob on mine but im not sure if it would work with the reverse lifter bit anyone no?

Yes it will work. Bore/tap out what ever youre using as a shifter to 16/17mm and push it on.

Lift up reverse collar will be unaffected.

[charlieog1243]

im looking at putting a jap crystal gearknob on mine but im not sure if it would work with the reverse lifter bit anyone no?

Yes it will work. Bore/tap out what ever youre using as a shifter to 16/17mm and push it on.

Lift up reverse collar will be unaffected.

legend cheers