anyone know what these wires do from the stock c3001 radio
Black
Red
Blue
Mostly White + blue stripy
Mostly Blue + White Stripy
I've probed them with a meter but they all seem to connect everywhere.
Also which is send and return on the arial's coax cable
thanks
vart
c3001 radio wires
c3001 radio wires
1986 1.4DL - 147,000 - C746 VRT
mine where all over the place when i came to rewiring for my stereo, and they where all non standard colours too!
light green / brown = perminent 12v / earth
speakers where green and grey with the negative having a black stripe
of yours I would GUESS
black - earth
red - Perm 12v
blue - switched 12v (ignition)
dunno about stripey ones
a quick google search for car radio wires blue/white threw up
Memory (+12v Constant) Yellow
Ignition (+12v Switched) Red
Ground (-) Black
Dimmer Pink/White (Alpine only)
Power Antenna Blue
Amplifier Turn-on Blue/White
Phone Mute Light Blue (Sony only
light green / brown = perminent 12v / earth
speakers where green and grey with the negative having a black stripe
of yours I would GUESS
black - earth
red - Perm 12v
blue - switched 12v (ignition)
dunno about stripey ones
a quick google search for car radio wires blue/white threw up
Memory (+12v Constant) Yellow
Ignition (+12v Switched) Red
Ground (-) Black
Dimmer Pink/White (Alpine only)
Power Antenna Blue
Amplifier Turn-on Blue/White
Phone Mute Light Blue (Sony only


i found a loom, or at least a loom appeared after i came back to it this evening with several wires in it. the speakers are indeed grey and black but then change but i can figure that bit out.
i have a green wire (battery side) and a red wire (stereo side) that don't seem to connect accross the loom so i'm at a loss. theres also a blue wire with an inline fuse, no idea here.
i have two brown wires connected into one loom spot (battery side), these go to a thick black wire combined with the two speaker returns(stereo Side). should this have one brown going into the red and one into the black?
thanks
i have a green wire (battery side) and a red wire (stereo side) that don't seem to connect accross the loom so i'm at a loss. theres also a blue wire with an inline fuse, no idea here.
i have two brown wires connected into one loom spot (battery side), these go to a thick black wire combined with the two speaker returns(stereo Side). should this have one brown going into the red and one into the black?
thanks
1986 1.4DL - 147,000 - C746 VRT