The MOD list.

Post by **Cruisen Volvo** » 02 May 2006 02:30 pm

Well here is an initial list of little mods that i am goin to do once cars is on the coast. Please add any cheap easy mods you think i have forgotten.

-Paint Mags
-Lowering
-Replace light in key with LED
-Paint dashboard trimmings
-Build covers for hiddy hole in boot.
-6"x9" on parcel shelf
-6" splits in front doors
-I would like to install some gauges but not sure about availability. Do other model cars gauges work in 360?

This is all i can think of for now, not easy thinking what you have to do when you haven't got the car or seen it for 2 months LOL.

I will also be reporting progress and pics under this topic but nothing will be happening till at least next tuesday.

Thanks

Post by **NasoNex** » 02 May 2006 05:22 pm

- Tinted windows and rear-lights
- White lenses in the front
- Remove the plastic lists on the side of the car
- Foglights, if you dont allready have that

etc.

Website · Post by **antiekeradio** » 02 May 2006 06:13 pm

I agree with solamanda

Post by **Omar** » 02 May 2006 08:29 pm

And can better a photo it is spread?

Post by **foggyjames** » 05 May 2006 01:36 am

360s use accessory gauges from later 240s.

cheers

James

Post by **hatch360** » 17 Jun 2006 03:00 am

If you remove the side plastics will it damage the paint or leave any notable marks?

I have an 87 360glt hatch and live in australia

Also is it possible to get clear indicators

thanks

Post by **foggyjames** » 17 Jun 2006 11:25 am

Yeah, you can remove the side mouldings...but it takes ages!

You can get clear indicator lenses from www.radicast.se, but they're not cheap.

cheers

James

Post by **hatch360** » 19 Jun 2006 03:31 am

How are the side mouldings attached to the car?

Website · Post by **antiekeradio** » 19 Jun 2006 09:03 am

spit.

err, no.. thats not it.

double sided automotive adhesive tape!

the stuff sticks pretty good

usually this stuff softens up when warm, so you could use a hairdryer to start with.

afterwards the sticky remains can be carefully removed with white spirit, WD40, etc.

Post by **NasoNex** » 24 Jun 2006 05:16 pm

Yeah, i got the glue/tape off after a while.. but it took some hours!
Don't remember what i used.. a type of chemical fluid, and a lots of paper..

Post by **Fuse** » 24 Jun 2006 06:22 pm

If there's rust beneath mouldings the paint will come off in pieces very easily.