340 1.7 tuning
Carb wise, hope you get the Solex, as Redline said, the webers were replacements, and don't have the carb base preheater or the idle solenoid, which caused me a few issues. I got a second hand solex, new gaskets, floats and needle valve, and my cars much better! (And I had done the same to the weber too!!!)
'89(G) 340 GLE B172k
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast
Black and Silver plates are only legal on pre-73 cars, i.e. those in the 'historic' taxation class. Which is annoying when you have a post-73 classic, cos not only do you have to have boring modern plates, but you also have to pay road tax....
'89 360GLE Saloon - sold.
'77 Dolomite 1850HL
http://www.wessexmotorclub.co.uk - http://www.funkyelephant.org.uk
'77 Dolomite 1850HL
http://www.wessexmotorclub.co.uk - http://www.funkyelephant.org.uk
- foggyjames
- *** V3M DONOR ***
- Posts: 9361
- Joined: 29 Jan 2004 04:20 am
- Location: Nottingham, UK
I suggest getting a number plate with as many England flags as possible, then picking up a Burberry cap 
Adam's car has the Volvo bodykit front valance on it.
cheers
James
Adam's car has the Volvo bodykit front valance on it.
cheers
James
VOC 300-series Register Keeper
'89 740 Turbo Intercooler
'88 360 Turbo Intercooler
'85 360 GLT
'81 343 GLS R-Sport
'79 343 DL
'70 164
...and some modern FWD nonsense to get me to work...
'89 740 Turbo Intercooler
'88 360 Turbo Intercooler
'85 360 GLT
'81 343 GLS R-Sport
'79 343 DL
'70 164
...and some modern FWD nonsense to get me to work...
-
classicswede
- *** V3M DONOR ***
- Posts: 5471
- Joined: 25 Apr 2005 06:52 pm
- Location: Anglesey North Wales
- Contact:
Adam aslo has a little extra spliter added on.
Dai
Please email me directly on dai@classicswede.co.uk
http://www.classicswede.com
phone/text 07824887160
Web shop http://www.classicswede.co.uk/

Please email me directly on dai@classicswede.co.uk
http://www.classicswede.com
phone/text 07824887160
Web shop http://www.classicswede.co.uk/

-
classicswede
- *** V3M DONOR ***
- Posts: 5471
- Joined: 25 Apr 2005 06:52 pm
- Location: Anglesey North Wales
- Contact:
I hope I am ok saying this-
From what I rember it was a Saab one
From what I rember it was a Saab one
Dai
Please email me directly on dai@classicswede.co.uk
http://www.classicswede.com
phone/text 07824887160
Web shop http://www.classicswede.co.uk/

Please email me directly on dai@classicswede.co.uk
http://www.classicswede.com
phone/text 07824887160
Web shop http://www.classicswede.co.uk/

-
germ
- *** V3M DONOR ***
- Posts: 1222
- Joined: 15 Nov 2006 08:14 pm
- Location: Hitchin Herts England - South Of France - NI Ards
Hi every one,
cat cams dont say how much there 1.7 camshafts cost does any one know?
and which cam should i get?
partnr.
duration
duration
maximum lift
lift at TDC
parts
application
[data link]
[0.1mm+cl]
[1.0mm+cl]
[cl=0]
[cl=0]
[-]
[-]
7901401
270 / 264°
241 / 234°
10.35 / 10.00mm
2.50 / 2.10mm
O.E.M.
MECH: rally & cross
7901402
283 / 283°
247 / 242°
11.50 / 11.00mm
2.95 / 2.65mm
O.E.M.
MECH: rally & cross
7901403
293 / 283°
256 / 247°
11.95 / 11.50mm
3.75 / 3.10mm
O.E.M.
MECH: rally & cross
7901410
293 / 285°
258 / 256°
12.75 / 11.95mm
4.20 / 4.00mm
custom
MECH: rally & cross
7901411
298 / 293°
261 / 258°
13.35 / 12.75mm
4.40 / 4.20mm
custom
MECH: rally & cross
7901412
298 / 294°
266 / 261°
13.50 / 12.75mm
4.95 / 4.45mm
custom
MECH: rally & cross
7901413
298 / 303°
271 / 266°
13.00 / 12.90mm
5.50 / 4.90mm
custom
MECH: rally & cross
7901414
303 / 298°
275 / 271°
13.30 / 13.00mm
5.80 / 5.55mm
custom
MECH: rally & race
7901415
306 / 303°
279 / 275°
13.60 / 13.30mm
6.10 / 5.80mm
custom
MECH: rally & race
7901416
309 / 306°
283 / 279°
13.90 / 13.60mm
6.35 / 6.15mm
custom
MECH: rally & race
custom grinds are available on request
cat cams dont say how much there 1.7 camshafts cost does any one know?
and which cam should i get?
partnr.
duration
duration
maximum lift
lift at TDC
parts
application
[data link]
[0.1mm+cl]
[1.0mm+cl]
[cl=0]
[cl=0]
[-]
[-]
7901401
270 / 264°
241 / 234°
10.35 / 10.00mm
2.50 / 2.10mm
O.E.M.
MECH: rally & cross
7901402
283 / 283°
247 / 242°
11.50 / 11.00mm
2.95 / 2.65mm
O.E.M.
MECH: rally & cross
7901403
293 / 283°
256 / 247°
11.95 / 11.50mm
3.75 / 3.10mm
O.E.M.
MECH: rally & cross
7901410
293 / 285°
258 / 256°
12.75 / 11.95mm
4.20 / 4.00mm
custom
MECH: rally & cross
7901411
298 / 293°
261 / 258°
13.35 / 12.75mm
4.40 / 4.20mm
custom
MECH: rally & cross
7901412
298 / 294°
266 / 261°
13.50 / 12.75mm
4.95 / 4.45mm
custom
MECH: rally & cross
7901413
298 / 303°
271 / 266°
13.00 / 12.90mm
5.50 / 4.90mm
custom
MECH: rally & cross
7901414
303 / 298°
275 / 271°
13.30 / 13.00mm
5.80 / 5.55mm
custom
MECH: rally & race
7901415
306 / 303°
279 / 275°
13.60 / 13.30mm
6.10 / 5.80mm
custom
MECH: rally & race
7901416
309 / 306°
283 / 279°
13.90 / 13.60mm
6.35 / 6.15mm
custom
MECH: rally & race
custom grinds are available on request
