as above but with out breaking any the the plastic clips:?:
Thanks
The bumper off
Stupid me. Front and a 360gltIs it newer or older model. Difference is newer has side indicator mounted to side of the bumper. In older they are mounted to side wing.
But here goes for the newer. There is two plastic inserts middle of the bumper below front head lights take them out. they are held in place with plastic thingys. If you can't get them out with your hands take a small flat blade screwdriver and carefully push it in the cap between that plastic thing and bumper skin. Once you have done that there is two 13mm bolts either side. But before that you have to take head light wipers off. Nut holding wiper is under cap which just pops open when pulled up and towards the wiper blade end. Also those side indicators clips off. When everything is unbolted just pull out the bumper.
Hope that isn't explained too compicatedly
But here goes for the newer. There is two plastic inserts middle of the bumper below front head lights take them out. they are held in place with plastic thingys. If you can't get them out with your hands take a small flat blade screwdriver and carefully push it in the cap between that plastic thing and bumper skin. Once you have done that there is two 13mm bolts either side. But before that you have to take head light wipers off. Nut holding wiper is under cap which just pops open when pulled up and towards the wiper blade end. Also those side indicators clips off. When everything is unbolted just pull out the bumper.
Hope that isn't explained too compicatedly
1999 Volvo S80 T6 Quiet long distance cruiser.
1990 Volvo 360 GLi Waiting inspiration.
1989 Toyota Land Cruiser For days when wellies aren't enough inside the car.
1987 Volvo 360 GLi Being restored.
1986 Volvo 740 Turbo Sold, but not forgotten.
1990 Volvo 360 GLi Waiting inspiration.
1989 Toyota Land Cruiser For days when wellies aren't enough inside the car.
1987 Volvo 360 GLi Being restored.
1986 Volvo 740 Turbo Sold, but not forgotten.
-
trabitom99
- *** V3M DONOR ***
- Posts: 4398
- Joined: 06 Jan 2007 02:38 pm
- Location: Bonn, Germany
IIRC, the plastic lugs on the radiator grille are pretty delicate, they can be prone to snap off ...
Tom
Tom
343 GL Touring B14.1E CVT (155) 98000kms 1980 (sold)
343 L Junior B14.3E MT4 (155) 229000kms 1981 (scrapped)
343 DLS B19A MT4 (155) 167900kms 1982
360 GL Injection B200F MT5 (231) 348598kms 1988 (scrapped)
360 GLT B200F MT5 (302) 230000kms 1988
343 L Junior B14.3E MT4 (155) 229000kms 1981 (scrapped)
343 DLS B19A MT4 (155) 167900kms 1982
360 GL Injection B200F MT5 (231) 348598kms 1988 (scrapped)
360 GLT B200F MT5 (302) 230000kms 1988
Damn i forgot the grille. Someone tell him how it is held in its place. Because in mine it's held by a screw and couple of cable ties. And i don't remember how it's originally held in place.
1999 Volvo S80 T6 Quiet long distance cruiser.
1990 Volvo 360 GLi Waiting inspiration.
1989 Toyota Land Cruiser For days when wellies aren't enough inside the car.
1987 Volvo 360 GLi Being restored.
1986 Volvo 740 Turbo Sold, but not forgotten.
1990 Volvo 360 GLi Waiting inspiration.
1989 Toyota Land Cruiser For days when wellies aren't enough inside the car.
1987 Volvo 360 GLi Being restored.
1986 Volvo 740 Turbo Sold, but not forgotten.
Rad grill bottom lugs are held in to the light clusters, so you don't need to touch them for a bumper on a mk3
'89(G) 340 GLE B172k
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast
'03 S60 D5 SE, '91 (J) MX5, 1954 Cyclemaster
Ex:
'89(F) 340 GL F7R (ex B172k) - Fake -> SBKV 300 Runner Up 08, 12; '91(H) 340 GL B14.4E - Kar; '88(F) 360 GLT B200E - Jet -> BKV 300 Runner Up 09; '89(G) 360 GLT B200E - Beast