Page 2 of 2
Posted: 27 Jun 2006 10:50 am
by RandomHero
Try asking one or both what the diameter of the fire ring on the head gasket itself it.
Can it be that the bore is the same on those engine's? But that the piston make a further 'travel' so that the actual displacement is a bit larger?
The B200 and B19 are both 1.986 cc.
Bore sizes
Posted: 27 Jun 2006 11:30 am
by mac
B19 & B200 Bore is 88.9 - 88.95 (depending whether block is C,D,E or G)
B23,B230 & B234 is 96.0 - 96.05mm (depends if block is C,D,E, or G.)
In all cases the stroke is 80.0mm.
Mac.
Posted: 27 Jun 2006 03:13 pm
by RandomHero
Thanks for that, then it's just weird that these gasket sets are both listed for B19 and B21.
bore sizes
Posted: 27 Jun 2006 04:09 pm
by mac
Sorry, left out B21 (I'm a daft bug..r today).
B21 Bore = 92.00-92.05mm (C,D,E or G) Stroke 80.00mm.
Arrgh! Mac.
Posted: 27 Jun 2006 06:55 pm
by RandomHero
Thanks!
I've sent the guy an e-mail about having an item listed for two different engine's.
Posted: 27 Jun 2006 11:28 pm
by foggyjames
When I said "bore", I didn't mean "stroke" by accident

I don't think it's wierd...I think it's an eBay seller shifting dodgy parts
cheers
James
Posted: 28 Jun 2006 01:40 am
by RandomHero
Got this back from seller:
I have checked a FAI gaskets catalogue and it confirms as per my description the same head gasket set for both models. You are correct the engine bore sizes are different but they use the same head set.
I don't know what to believe, still, I want to replace the cylinder head. When I go to the dealership they can most likely get me the correct gasket set, but at a price...
Can i buy this set? The other ebay advert tells the same thing; Gasket set both for B21 and B19 engine's...

head gaskets
Posted: 28 Jun 2006 09:51 am
by mac
Ok - chapter n' verse.
Volvo list the same gasket, part no.1378645 for B19, B200 and B21 - I have checked this morning - a 1975 240 B19, 1978 240 B21, 88 360 B200, and all show the same head gasket.
I guess the gasket fits the larger bore (B21 max 92.05mm) and the isicrepancy with the smaller bore (min 88.90) is regarded as acceptable (max difference is only 2.15mm (and could be a little less @ 2.05mm).
Looks like the seller is ok.
Mac.
Posted: 28 Jun 2006 09:53 am
by mac
isicrepancy ?? wot am I like! - where did dis go.?
Mac.
Posted: 28 Jun 2006 12:26 pm
by RandomHero
LOL, what is isicrepancy??
But thanks for checking!
Posted: 28 Jun 2006 12:35 pm
by mac
probably discrepancy spelt wrongly, but with me you never know!
Mac.
Posted: 28 Jun 2006 03:01 pm
by redline

could it be short for indiscreet discrepancy

Posted: 28 Jun 2006 08:30 pm
by foggyjames
Well that's shocking! Volvo obviously inset the fire ring on the B19/B200. Crazy Swedes. I take it all back Mr eBay seller.
cheers
James