Page 3 of 5
Re: Breaking 2x340s
Posted: 21 May 2012 02:47 pm
by Chris_C
delrio wrote:How do I upload pictures?
Do you have a photobucket account or similar? If so, upload there and link across. Otherwise I'll pm you an email address.
Re: Breaking 2x340s
Posted: 24 May 2012 11:40 am
by delrio
Chris_C wrote:delrio wrote:How do I upload pictures?
Do you have a photobucket account or similar? If so, upload there and link across. Otherwise I'll pm you an email address.

Re: Breaking 2x340s
Posted: 24 May 2012 11:50 am
by delrio
volvomania wrote:Before I start sending you a wish list......were you planning on coming to the BKV on 16 & 17 June nr Ollerton?
I am actually after the rubber strut mounting tops (the worse they are the better) and perhaps some other bits as well.
I was playing with the idea of going! Pm me your wish list and I'll see what I can do!
Re: Breaking 2x340s
Posted: 24 May 2012 02:45 pm
by Chris_C
Damn, if that was a 5dr I'd have bitten your arm off

Sorry dude, I've been an idiot and not noticed where you said it above. Thanks for posting them though
Re: Breaking 2x340s
Posted: 24 May 2012 05:46 pm
by theo2468
Chris_C wrote:Damn, if that was a 5dr I'd have bitten your arm off

Sorry dude, I've been an idiot and not noticed where you said it above. Thanks for posting them though
Yo Chris I've got that colour in 5 door, sure we can sort something out!
Re: Breaking 2x340s
Posted: 24 May 2012 09:13 pm
by Hell Driver
Sorry, only just saw your reply, if you are going to the BKV then bring the door seals, if they are better than mine I'll have them off you. I'll be there Sat and Sun
Re: Breaking 2x340s
Posted: 28 May 2012 07:47 pm
by Speedy88
Hi,
I need all these parts. How much for them posted?
Radius arm
Drivers side wishbone
I also need a steering collumn - not so urgent right now
Re: Breaking 2x340s
Posted: 02 Jun 2012 10:19 am
by volvomania
Well if you ae coming I am after the following:
Battery brackets
Front McPherson top mounts
Front Mc Pherson legs
On the rear axle the rear stays (327526) plus bolts and brackets
Gearbox installation rubbers (installed in the carbody)
Rear engine mounts (the ones on the bell housing)
all has to do with possible future BBB projects....
Re: Breaking 2x340s
Posted: 03 Jun 2012 06:14 pm
by Benfraser
PM'd!
Re: Breaking 2x340s
Posted: 04 Jun 2012 07:01 pm
by valman
right, whats the engine in the 1.4 like? does it run well? what was the fuel consumption like etc etc? and also how much if its good
cheers
Re: Breaking 2x340s
Posted: 05 Jun 2012 01:10 am
by Benfraser
Hi just wondering if the 1.7 has got power steering? If it has then how much for the steering column and steering rack and the power steering pump with the lines and everything needed for the pump etc...
Thanks, you can call me on 07985607419 or email me on
ben.fraser2@yahoo.co.uk
Ben
Re: Breaking 2x340s
Posted: 05 Jun 2012 02:48 am
by macplaxton
The RHD 1.7s don't have PAS as far as I know - because it don't fit.
Re: Breaking 2x340s
Posted: 05 Jun 2012 05:05 pm
by Benfraser
The RHD 1.7s don't have PAS as far as I know - because it don't fit.
Whats PAS? Power steering?
Ben
Re: Breaking 2x340s
Posted: 05 Jun 2012 05:09 pm
by Chris_C
Indeed, Fwiw, 1.7s should be light steering, mine was even with 7j wheels and a heavier engine. Top mount bearings are the normal problem here.
Re: Breaking 2x340s
Posted: 05 Jun 2012 05:21 pm
by Benfraser
What it isnt possible to fit power steering to it?
ben