Page 3 of 5
Posted: 11 Jul 2007 09:18 pm
by filthyjohn
kaos wrote:Is the release fork avalible???
also is it in GOOD Condition
and how much would you want for it?
Cheers
It's available, by which I mean it will be once I pull the engine out, which should be in the 2 weeks after july the 27th (shipyard fortnight). Cost depends on how much skin comes off my knuckles removing it

I'll let you know once It's out, if you can wait that long.
Posted: 11 Jul 2007 09:21 pm
by filthyjohn
kms racing wrote:is the frount subframe availible ,compleat with lower arms hubs and shocks
All available mate, though it's all pretty rusty. Might all clean up into usable condition, but no promises sorry. It'll be in my two weeks off work too, once the lump comes out. The suspension should be ok, with only 50-odd thou on the clock. You could have it all dirt cheap anyhow, as it'll only get cubed if you don't want it.
Posted: 11 Jul 2007 09:22 pm
by filthyjohn
sven360 wrote:
Yeah, are those X pack arches available off of the trailer?
Sorry, they're custom and available by special order only
And yeah, those are 340 vario trims. Pimp as owt like.

Posted: 12 Jul 2007 05:39 pm
by kms racing
filthyjohn wrote:kms racing wrote:is the frount subframe availible ,compleat with lower arms hubs and shocks
All available mate, though it's all pretty rusty. Might all clean up into usable condition, but no promises sorry. It'll be in my two weeks off work too, once the lump comes out. The suspension should be ok, with only 50-odd thou on the clock. You could have it all dirt cheap anyhow, as it'll only get cubed if you don't want it.
u have pm!
Posted: 12 Jul 2007 06:05 pm
by kaos
filthyjohn wrote:kaos wrote:Is the release fork avalible???
also is it in GOOD Condition
and how much would you want for it?
Cheers
It's available, by which I mean it will be once I pull the engine out, which should be in the 2 weeks after july the 27th (shipyard fortnight). Cost depends on how much skin comes off my knuckles removing it

I'll let you know once It's out, if you can wait that long.
well save hassle, depending on where you are? i'll take the bell housing as well! my release fork is shall we say majorly tramp atm, no one knows how long its going to hold so im desperate but can wait:)
Posted: 02 Aug 2007 03:47 pm
by filthyjohn
little update, because this his just happened:
So all those front end parts are available, and it's probably going to get crushed soon.
Posted: 02 Aug 2007 03:49 pm
by filthyjohn
kms racing wrote:
u have pm!
I never got that PM mate, tried to send one but it doesn't seem to have delivered, hasn't left my outbox.
Posted: 07 Aug 2007 01:36 am
by kaos
i still want that bell housing and release fork...
Posted: 07 Aug 2007 11:35 am
by filthyjohn
I don't think I'll be able to do any roadtrips this month unfortunately, so would you mind if I just posted the fork? If you need the bellhousing I could try to find a courier for you, or if you know a cheap one.
Posted: 07 Aug 2007 11:47 am
by filthyjohn
Another reason I love 300s:
The engine came out in just under an hour, not hurrying either. Whereas this FWD toss took half the day and a lot of swearwords.
Don't suppose anyone needs any cavalier bits?

Posted: 07 Aug 2007 06:39 pm
by kaos
filthyjohn wrote:I don't think I'll be able to do any roadtrips this month unfortunately, so would you mind if I just posted the fork? If you need the bellhousing I could try to find a courier for you, or if you know a cheap one.
i know foggyjames can send a bell housing for £7 but dont know who that is with.
i'll go hunting couriers because i do need it! so keep the whole unit aside for now please:)
Posted: 08 Aug 2007 07:26 pm
by filthyjohn
It's off:
Release fork looks like new:
Didn't present any problems, no stuck fasteners for a bleedin change
Will have to take it to the post office tomorrow, as that'll give me a price, and an accurate weight to quote other courier firms. Feels like about 8-10 kilos at a guess.
Posted: 11 Aug 2007 12:15 am
by kaos
thats BLOODY SPOT ON!!!!!!!!!!!!!!!!!!!
i'll have to take a photo of mine when i take mine off
all i know is its welded up

Posted: 11 Aug 2007 02:57 pm
by filthyjohn
^^PM'd
Another updated list of the parts which are gone:
Windscreen and Weatherstrip
Diff+box, prop and shafts destroyed while removing those

Lumbar adjusters, Heater resistor, Warm water stop valve
Passenger wing mirror, Light wipers
Front passenger door handle and rods
Bonnet, Drivers door
Tailgate+ Drivers seat (for me)
Engine
Fuel filler cap
Nearside A pillar
Clocks+surround
Posted: 11 Aug 2007 03:10 pm
by kaos
just a thought while im here. has it got the front wiper blades for the headlamps still? as im missing one
