I need to know how i can remove the face of the blower switch on my Volvo 360. Its integrated in the plastic frame and i want to end up with just the switch. tips on how to remove it from the trim?

The rotary knob pulls off (it's tight) and the switch body carries a threaded portion which passes through the trim (from behind the trim) and is secured by a nut. Once the knob is removed the nut becomes visible and the fixing method is obvious.

Mac.

fantastic, ill give that a try when i get home. I removed the whole center panel in my racer. But id be neat if i can keep the OEM switch in the new panel