Anyone know where I can get the paper gasket that goes between the gearbox and diff?
It's for a 5 speed.
Or do I need to make one?

Hi mate.
Didn't mac used to do them.
Not shure if he is about at the minute.
Cheers Mark.

Mac / RJ / Dai should have one.
See here: viewtopic.php?f=8&t=14883&p=175599

Macs kit is for the diff cover not the diff-gearbox one.

Have you tried Volvo? This might be the only part that isn't NLA. Get the pn first.

Make you self that paper gasket..
when i build my lsd i was making diff gasket and from diff to gearbos gasket + grease where no need a gasket..

tralla44 wrote:Make you self that paper gasket..
when i build my lsd i was making diff gasket and from diff to gearbos gasket + grease where no need a gasket..

Iwas making from bosch old air filter box

Fair enough, will get some gasket paper and make one.
I've used an old bosch parts box before though!
It's not urgent, but theres a bit of oil leaking out and I'm unsure if this is leading to a noise that sounds like an angry turkey sometimes when in 2nd + 3rd gear.

Part number here: viewtopic.php?f=8&t=13193#p164442

It may not be a problem in the 5 speed but the 4 speed is very dependant on the gearbox gasket thickness, only the exact material spec will do. Anything else will need the compressed thickness calculated and measured for shim adjustment as in Haynes but more complex. It controls the bearing preload.