Page 1 of 1

Power assisted steering

Posted: 08 Sep 2005 09:22 pm
by 340 Nate
hi all again,

was power assisted steering fitted in all 340 1.4 models after a certain year or is it just specific models?, 1989 is the year of the car so hoping it is fitted for tht model/year :)

cheers

Nate

Posted: 08 Sep 2005 09:27 pm
by 340GLT
Sorry to put a downer on things, but no 340's were fitted with PAS from factory, it is possible on a conversion!!
Cheers Adam

Posted: 08 Sep 2005 09:46 pm
by 340 Nate
hehehe s'cool, just better build up these twigs called arms :lol:

cheers

Nate

Posted: 14 Sep 2005 11:37 pm
by foggyjames
I have a 340 PAS conversion kit....but I want good money for it :( ...they were £2000 new.

cheers

James

Posted: 15 Sep 2005 12:14 am
by 340GLT
Didnt know that fogs!!! Any chance you can give me dimensions of the bottom pulley wheel and bolt sizes etc? Photos?
Cheers Adam

Posted: 15 Sep 2005 01:20 am
by foggyjames
Maybe...one day ;) Must get around to selling it before it grows roots!

cheers

James

Posted: 15 Sep 2005 07:59 pm
by classicswede
Why not use the 400 pas pump and pully. There are loads dumped on steet corners and scrap yards

Dai

Posted: 15 Sep 2005 08:21 pm
by 340GLT
Cuz i have a 1.4!!
Cheers Adam

Posted: 15 Sep 2005 09:50 pm
by classicswede
All the more reason to drop in the turbo lump :wink:

Dai

Posted: 15 Sep 2005 10:21 pm
by foggyjames
Insurance... :(

cheers

James

Posted: 15 Sep 2005 11:40 pm
by 340GLT
The 400 lump will have PAS Dai plan is to get as much on the car and working so that when i have a week of college etc everything can be dropped in!! Thats why i would likle PAS on the 1.4 then it will be an easier conversion!!!
Cheers Adam

Posted: 15 Sep 2005 11:55 pm
by Chris_C
Whereas mines just to run on 1.4 for another year :P FOGGY!!!!

Posted: 09 Nov 2005 12:26 am
by 340_singh
when a 1.7 turbo is slammed in from a 440, the PAS column can also be bolted on? meaning a 440 PAS 340?

this is just gettin better and better!! :P

Posted: 09 Nov 2005 12:33 am
by 340GLT
Not exactly no, to do the conversion you need the PAS setup from a 360 and then just the pump from the 440 turbo lump to give the car PAS!!
Cheers Adam

Posted: 09 Nov 2005 12:45 am
by 5lab
tyre pressures will make more of a difference to steering than you can believe.. pump em up a little high..