http://cgi.ebay.co.uk/WOLFRACE-SLOTMAGS ... dZViewItem


i want them! with some low profiles and phat tyres!! would recon and paint them before putting them on.

are these compatible with my car?

4x100 will fit...

The offset is way out though... I think 300s are around 32-38mm or something.

what will this do to the ride?

if they no good me no buy! will they just plug and play

You wouldn't really be able to do what you want with them. They're only 13x5.5" So you couldn't fit low profile and wide tyres and keep within reach of the original rolling diameter. 5.5" wide means you wont really be able to go wider than 195 tyre width, and I don't expect you'll be able to have a low enough profile for the looks that you want.

13" is wayyy to small for low profile tires. for them, you ideally want 15 or 16" wheels

bollocks

will stick to steelies then lol my mate has got 18's 4stud pattern from a volvo for a volvo.

but im not keen on fucking the cars handling, ride, and economy up. jus for bad boy rims

I'd say even 17s are too big, you'll probably struggle to fit 18s in the arches and it'll look like a tractor if your not careful, I agree with Hugh 15s or 16s maximum if your going low pro's, mine are et37 btw so 25 is a fair way off, i like the style of those and what your aiming for, just go a little larger
cheers
Ali

Ok, don't mind my answer....

18s from a volvo wont fit, they will be v40 wheels and have a different pcd.

Speaking of wheels have you got any pics of yours yet Ali they are looking good!!!
Cheers Adam

You can't get tyres for 18s which will keep them the 'right' size. Maybe that doesn't matter to you, but your speedo will mis-read, and the car will accellerate slower (but have a higher top speed). 17s are already down to ~35 profiles.

Otherwise those rims will fit. I'm pretty sure that offset would be ok-ish actually Steve - 10mm isn't night and day. The big problem is that with low profile tyres, you'd have tiny wheels - like that white drift 340. Maybe that's the look you're going for (and I can see the appeal), but be aware that that's what you'd have!

I'd hang on for some pimp 15 or 16" rims.

cheers

James

actually, it wont give a higher top speed cos most 300s wont reach the redline in top

5lab wrote: cos most 300s wont reach the redline in top

Hugh , most 300's wont reach the REDLINE in any gear LOL

The only picture ive got at the moment Adam is the one in my avatar and this one (although i have finished all the alloys now):


Id go and take more but the cars not looking its best with a wheel off and jacked up due to the knackered damper, plus its too dark and damn cold! Got round to starting to build a strutbrace in "reading week" aswell, built the strut top mounts just need to do the bar linking them now and I swapped my rear strutbrace into it aswell, have to see if it makes a difference,
cheers
Ali