340 1.7 tuning

A global place for general discussion (Volvo, V3M or non-Volvo related topics).
Please introduce yourself here, your Volvo 300 hobby...
NO technical support, parts requests or car advertisements here
germ
*** V3M DONOR ***
Posts: 1222
Joined: 15 Nov 2006 08:14 pm
Location: Hitchin Herts England - South Of France - NI Ards

340 1.7 tuning

Post by germ »

Hi

i was wondering if you guys could help me with my tuning options
for the volvo 340 1.7

cams
carbs
etc

as for carbs i thouht a weber 32/36 might be good jetted for 1.8 golf
not sure if it would fit thought

also the clutch on my car is dead is it easy to change? its a 5speed manual

power wise i am looking for 130hp with out turbo charging nor engine swapping
any help appresiated :D thanks

Will
classicswede
*** V3M DONOR ***
Posts: 5471
Joined: 25 Apr 2005 06:52 pm
Location: Anglesey North Wales
Contact:

Post by classicswede »

Hi Will,

130BHP is a to ask from the 1.7 lump. You will need a cam from either catcams or get one reprofiled.
You would be best to swap the manifold for a twin webber set up. No one makes one at the moment so this would have to be made as a one off. On the other end you will need to change the exhaust. The std manifold will not cope well with this power so should be changed for a 440 B18U one. The rest of the system would need to be made as a 2 or 2.5" system I can get these made no problems.

The easy way to get that power would be to simply bolt in the B20F. It quite easy to do. Have a search through some of my posts. I think I have explained what parts need to be swapped.
Dai

Please email me directly on dai@classicswede.co.uk

http://www.classicswede.com

phone/text 07824887160

Web shop http://www.classicswede.co.uk/

Image
germ
*** V3M DONOR ***
Posts: 1222
Joined: 15 Nov 2006 08:14 pm
Location: Hitchin Herts England - South Of France - NI Ards

Post by germ »

Thanks very much :D vey helpful indeed

is the manifold a bolt on fit?

and would the weber 32/36 fit on the standard carb manifold its just i found a cheap 1 on ebay france (carb)

also engine swapping will be a bit hard at the mo becouse my garage isnt finished its not build in other word (french workers :? )


last is my clutch is worn out i was wondering if changing it ment taking the gearbox off and stuff or worse the engine :cry: then i might as well change the engine.

thanks again
will
classicswede
*** V3M DONOR ***
Posts: 5471
Joined: 25 Apr 2005 06:52 pm
Location: Anglesey North Wales
Contact:

Post by classicswede »

manifold is bolt on fit. If you dont mind waiting a while I'll be removing mine complete with the down pipe made to fit.

Don't know about the carb. You would need to offer it up but almost anything can be made to fit.
I dumped a injection throttle body on mine as I run GPL only.

When I have done my clutch I have always taken the engine out as the bolts tend to be too tight to undo in position.
I did remove the bell housing once with the engine in. I had to remove the mounts and lift the engine right forward to get the bell housing off. I'd have been quicker just to pulled it out.
Dai

Please email me directly on dai@classicswede.co.uk

http://www.classicswede.com

phone/text 07824887160

Web shop http://www.classicswede.co.uk/

Image
User avatar
340cbr
Posts: 501
Joined: 31 Oct 2005 12:50 pm
Location: Portugal

Post by 340cbr »

Take that engine out and put in a 400 series engine.

The non turbo B18EP with 109hp stock, or the Turbo B18FT
| 92' 965 Turbo 16v | B204FT - 190hp |

Had: 90' 340 GL + Turbo | B18 FT | Koni's | Alpina White |
classicswede
*** V3M DONOR ***
Posts: 5471
Joined: 25 Apr 2005 06:52 pm
Location: Anglesey North Wales
Contact:

Post by classicswede »

The B20F is 120 BHP the smae as the 1.7 turbo. Its a lot simpler to fit and keeps to a na engine.
Dai

Please email me directly on dai@classicswede.co.uk

http://www.classicswede.com

phone/text 07824887160

Web shop http://www.classicswede.co.uk/

Image
User avatar
antiekeradio
Posts: 697
Joined: 04 Jan 2004 10:53 am
Location: roosendaal - netherlands
Contact:

Post by antiekeradio »

yep, definately not advisable to start tuning with the stock setup.

PS change your brakes first.



if you do start tuning the stock engine you might end up spending a lot of cash on another model stock engine ;-)


the B20F might be taken apart, balanced, weighed out, polished (pushrods mainly) and the head ported and flowed.

next step camshaft, fuel management, etc... then you're getting somewhere.
classicswede
*** V3M DONOR ***
Posts: 5471
Joined: 25 Apr 2005 06:52 pm
Location: Anglesey North Wales
Contact:

Post by classicswede »

On the subject of brakes all I have done with mine is replace almost every thing with new std parts.

New drums, shoes, flexi pipes,discs,pads,calipers and new copper pipes where needed. It now stops realy well. :D
Dai

Please email me directly on dai@classicswede.co.uk

http://www.classicswede.com

phone/text 07824887160

Web shop http://www.classicswede.co.uk/

Image
germ
*** V3M DONOR ***
Posts: 1222
Joined: 15 Nov 2006 08:14 pm
Location: Hitchin Herts England - South Of France - NI Ards

Post by germ »

Bad news guys my car got nickrd by some fuking french asshole

:evil: :evil: :evil: :evil: :evil: :cry: :cry: :cry: :cry:

and insurance dont pay up here so....

i found a VOLVO 340 GLT REDLINE its a english guys car and he wants 10euros for it.........so i bought it 1 or 2 probs clutch is nakerd and small hole in exhaust, it has test, 25euros of petrol new batery and no rust including a nice interior

WORTH 10 EUROS?.... I THINK SO

Nice car i guess but money needed to fix up

as i had just fixed the clutch on the car that was nicked:(

SO WHAT DO YOU THINK OF MY BUY???
classicswede
*** V3M DONOR ***
Posts: 5471
Joined: 25 Apr 2005 06:52 pm
Location: Anglesey North Wales
Contact:

Post by classicswede »

Gutted for you. Who on earth would steal a Volvo 340?!?!?!?!

Sounds like a nice buy but us lot here are simple minded and need PICS please. :wink:
Dai

Please email me directly on dai@classicswede.co.uk

http://www.classicswede.com

phone/text 07824887160

Web shop http://www.classicswede.co.uk/

Image
User avatar
SteveP
*** V3M DONOR ***
Posts: 7944
Joined: 21 Sep 2004 12:45 pm
Location: Coventry, UK

Post by SteveP »

Ouch.. bad luck, but damn - 10 euros... what a bargain :D
1989 - Volvo 360 GLT
1985 - Volvo 360 GLS
2008 - Volvo S60 SE Lux
germ
*** V3M DONOR ***
Posts: 1222
Joined: 15 Nov 2006 08:14 pm
Location: Hitchin Herts England - South Of France - NI Ards

Post by germ »

When its washed up and on mydrive ill post some pics
forgot to say his delivering it for free too (31km)
all i can say is NICE!!! :D

is the redline a special edition?
and it seams to have bodykit-but not sure yet

car was appently stolen by a 31 year old italien :( and he crased the car into a tree at high speed he was drunk, the car still worked so he decided to continue to drive it harshly then into a river (he was still in car)
there where apparently lots of witnesses but worst of all the police want to put me in prison becouse the guy drowend in my car :(
i have seen the report thats the only way i know this

I AM RESPONSIBLE FOR SOMEONE ELSES STUPIDITY or CRAZYNESS
France is wierd but i should win this case as i have witneses :?
any way tomorrow i go to police with witnesses and try and sort this out ill let you know how i get on..... unless i go to prison :( :cry: :( :cry:
User avatar
foggyjames
*** V3M DONOR ***
Posts: 9361
Joined: 29 Jan 2004 04:20 am
Location: Nottingham, UK

Post by foggyjames »

Interesting logic from the French police there :)

The redline is a special edition, but there's not much to it beyond a 'GLT' front lip spoiler, a 'GLT' front grille, and red trim on the seats and bumpers.

cheers

James
VOC 300-series Register Keeper
'89 740 Turbo Intercooler
'88 360 Turbo Intercooler
'85 360 GLT
'81 343 GLS R-Sport
'79 343 DL
'70 164
...and some modern FWD nonsense to get me to work...
User avatar
Ronnie
*** V3M DONOR ***
Posts: 1401
Joined: 27 Oct 2005 03:23 am
Location: Inverness
Contact:

Post by Ronnie »

Nightmare - try not to worry too much, I'm sure justice will prevail and you'll never even go for prosecution. Probably just making sure you weren't in the car at the time.
'85 360GLT Mk2 3 Door B19E - SOLD
'94 L400 Mitsubishi Delica LWB

http://www.filterfeeder.eu
germ
*** V3M DONOR ***
Posts: 1222
Joined: 15 Nov 2006 08:14 pm
Location: Hitchin Herts England - South Of France - NI Ards

Post by germ »

"Nightmare - try not to worry too much, I'm sure justice will prevail and you'll never even go for prosecution. Probably just making sure you weren't in the car at the time"


Thanks Very Much :D


alls ok as i had my witnesses of my car, and the family of the guy that stole it didnt roll up to the police station,

so they were fined and i was aloud to walk away FREE! :D

my new old car should be rolling up somtime next week if not ill have to try and tow it back with a renault 5 :?

Who is Interested in those RAGE back boxes as my dad has 1 on his BMW 2002TI 1972

i may try and get a sound clip if you want it sounds so good!! :wink:
probally with video so dont moan about the car being a bit dusty as i have no garage at the moment
Post Reply