Page 1 of 1

340 head unit wires

Posted: 07 Jul 2007 12:59 pm
by 340 Nate
hi all just got a din connector which i have to wire up to where the old connector was, problem is ive just looked high and low for my haynes manual and its gone missing :( , could anyone tell me what the 2 brown wires, 2 red and black wires, and a green wire do?
took a pic of it just incase
Image

cheers sm40

nate

Posted: 07 Jul 2007 03:03 pm
by fume
The green wire is the permanent live, the two browns are earths and the other two are the speaker wires.

Posted: 07 Jul 2007 04:47 pm
by 340 Nate
hi there, cheers for the help, i think the speaker wires are the grey and black ones u can see just about, or unless theres more wires, did try it that way but didnt work, made my dash stop working including revcounter :( , can still indicate and flashes on the dash left or right indicating but somethings gone now :S , all fuses are intact i think

cheers

nate

Posted: 08 Jul 2007 12:32 am
by 340 Nate
well i got my dash working again thankfully and i did finally get my head unit and speaker fitted with cable ties :lol: Image

cheers

nate

Posted: 08 Jul 2007 08:22 am
by Tourinki
erm.. That's different...

Posted: 08 Jul 2007 03:31 pm
by 340 Nate
all in all it cost me nothing for speaker n stereo unit so i thought why not :roll: lol

nate

Posted: 08 Jul 2007 04:38 pm
by redline
love the wood rim wheel mate

Posted: 09 Jul 2007 01:12 pm
by Chris_C
The black/red and the green are both +12, although one is the switched ignition, and the other permanent. Can't remember which way round though ;) Brown is earth.

Posted: 09 Jul 2007 09:05 pm
by 340 Nate
yea i used a volt tester thing and eventually figured out i shouldnt split those red and black wires as it stopped my dash working :roll: :lol: , all sorted in the end sm40

cheers

nate