As some of you will know the spigot bearings for the 1.7 are NLA from Volvo now! (I'm sure all you will be able to buy from volvo in future for 340's is oil filters, cam belts and spark plugs before long but that is another story)

I have been able to find a supplier for the spigot bearing (you will need it for 16v conversions and should be changed when doing the clutch) but I will need to buy a case of them (probably about 20pcs)

Price will be around £5 (waiting confirmation as price may have changed due to metel prices etc)

Who would be interested in these?
Perhaps make a list and add your name

Dai

Filthyjohn x2

Put me down for 2

how long before you'd have'em?

Depending on waiting time, I would like to have 2 (in the NL).

Why isn't anybody selling 16v kits yet?!

I'll be down for 2 as long as they are brand of goodness please mate.

They will be a good brand. Cheap nasty bearings are more trouble than they are worth. I have consistantly had failures with a couple of makes of bearings so will defo not be using those makes for this.

Delivery time should be 1 - 2 weeks from date of order.

The list ,

Me x2
Filthyjohn x2
Kaos x2
Chris_C x2

Someone would think that a few of us are collecting cars... Cheers Dai, I keep meaning to order some, but havn't got round to it!

The bearing company got back to me yesterday with full details

The bearing make is CCVI (I've used these before and they are ok)
Order qty is 20 pcs per carton
Price each based on one carton is £5.20

Ok if everyone who has put there name down for this is still wanting I will order in the next day or two. The left over ones I will keep in stock and add to the parts list.

Confirmed Chris x2

Confirm x2 will find a £10 to paypall unless you can wait till the 31st?

actually while im here can they make the ones to go in the end of the bell housing?? at the prop end!

Confirmed 2 for me please. Paypal is fully charged with hard-earned and ready to fire.

I will get them ordered Today