Today is a good day for science ! I bought last week a Pyle alarm system and it`s almost fully installed, except the remote lock system. I came to a stop when i reached the driver door- the actuator itself it`s given me a headache. It has 4 wires attached to it, but i don`t if that is a switch or like the other 3 it`s an electric motor. For the moment, i took a spare one from the Gle and i`m waiting for a suggestion.
Thanks.

Its just a switch, you will need to install another Passenger door motor in the drivers door along with the switch.
Adam

Ok, i`ll do that. Hope i got the room or if not, i`ll sort it out in one way or another.
Thanks a lot!

You do have room put it in the recess about 4 inches across from the existing switch, thats how mine is.
Adam

Just check before you do too much... Kar's was a motor and a switch, as is Fake's. You have 2 wires that power the motor (power one way round to lock, other way to unlock) and 2 that power the switch that do the other motors, so I've never had to install another motor.

Chris you sure on that? Swear volvo diagrams just switch to the other two wires for polarity.
Adam

The diagrams don't show it, but put a battery across it

I'm sure.