• Idle speed on B200k

Posted: **11 Aug 2005 08:48 am**

I was wondering how to adjust the idle speed on my B200K (86 mod)

I cant fint any skrew....

Can it be in this phote?

Help Please...!!

Posted: **11 Aug 2005 09:40 am**

nope, lower, other side of carb

Posted: **17 Aug 2005 01:20 pm**

Where, can you show me?

Posted: **17 Aug 2005 04:23 pm**

arrow 2, are you pointing to the white disc section, or something that is behind that????

could well be there!!! it should be the screw that defines the (rotary) position of the white plastic pulley with no throttle.

it could also be that this setting is done through the cable connection (just outside your pic, right side) but normally such a setting is not ideal.

Greetings Wouter

Posted: **17 Aug 2005 07:04 pm**

Ok, it is on that side that faces towards engine, look from picture, it is one far right almost middle.

http://www.janiervast.com/gallery/main. ... temId=3900

I have few other pics from carb there

My carb pics:
http://www.janiervast.com/gallery/main. ... itemId=143

Posted: **18 Aug 2005 09:08 pm**

I dont see it, can you show it with an arrow please?

Posted: **18 Aug 2005 09:12 pm**

http://www.janiervast.com/gallery/main. ... temId=4343

Posted: **18 Aug 2005 09:20 pm**

Are you sure?

Thank you...

Posted: **18 Aug 2005 09:26 pm**

Yes I'm sure, that adjusts position of throttle linkage and idle speed. Some older model had different location for idle speed screw, but I'm not sure if it was used in 300 serie at all.

Posted: **18 Aug 2005 10:22 pm**

THAT's THE ONE!!!

100% sure.