It looks like I'll be breaking a 360 shortly. It's a mk3 saloon (edit: in that bloody blue/green metallic colour). Body is shot, but mechanicals are good. I'll probably be keeping most of the oily bits, but if anyone wants anything else...

I haven't seen it yet, but I thought I'd issue a heads up based on the info I have. It has leather, although I believe it isn't in great shape. It had an 'SE' badge on the back too, but hands off! The real anoraks will get that

cheers

James

Are the bumpers any good?

Any good panels atall? Could be interested in full exhaust if it's any good. Drivers seat if its better than mine (which is pretty good though...), door cards (again, if they're any good...).

I already have a spare full exhaust Steve.

Condition unknown at present - I haven't seen it - but it is described as 'scruffy'. Rest assured it will go to the crusher as a bare shell...if that!

cheers

James

I might need a splash engine guard for a mk2 360 if there is useable one but will need to check the bolt holes match Hadn't thought I could salvage from a different year car

cheers mickt

Might want the leather, depending on condition/price. Could pick up as well, as I still need to come and raid your engine collection. Do you still want this bonnet too?

Bonnet would be good, ta.

Bear in mind this is a saloon, so the rear seat backrest isn't the same.

cheers

James

James, can I have a couple of terminals which plug into the the instrument cluster multiplug - I STILL haven't got that bleedin ambient temp guage working

All the best

Of course!

cheers

James

Oh aye, hadn't read the first post properly
Planning a roadtrip during my 2 weeks off work (starting 28th july). Will probably be during the second week of that, but I'll give you a shout with plenty of notice.

It's a plan. Bear in mind we'll be heading for Sweden from the 15th.

cheers

James

Think I might perhaps be interested in the transaxle

Know someone looking for a 360 rad- pm me your number if you want and I'll pass it on.
Cheers Sven

I should really keep the radiator for my blue 360...although I bet it's knackered, like every other 360 rad is at this age!

Ali...what the heck is that? It looks like the case is bent, but being cast ally, surely it'd crack, not bend? The transaxle was due to end up in Nessy behind a T5 lump, but there'll be other boxes...and I'm probably only benchracing anyway.

cheers

James

Ali, is the box knackered then? Looks like something has sheared off somewhere and struck the side of the case hard, but not quite hard enough to come through. I used to do that to vauxhall F20s every couple of months Seriously I hope it isn't bust. (selfishly, this has implications for those of us with aspirations of higher power )

James- I can be down well before the 15th, will PM when I have more solid plans.